CDMA Wideband Pico Repeater

Home » Products » PICO Repeater » CDMA Wideband Pico Repeater

RCTC800K1555
RCTCK-15

The CDMA wideband pico repeater is applied specifically in small area indoor DAS system. It provides quick coverage solution for weak signal and block zones reducing drop/off calls; it eliminates the signal dead spot, rejecting the interference and providing a stable signal communication for cell phone users. The CDMA wideband pico repeater has power supply and output power indications; with ALC function design provides the high reliability and stability and low interference to BTS. It has compact size, low power consumption and easy installation. The CDMA wideband pico repeater can be used in basements, cars, elevators, parking lots, villages, tunnels, mines, clubs, residential houses, countryside, tall buildings, vessels, underground facilities or any other place.

Electrical Specification of CDMA Wideband Pico Repeater
Uplink

Item Electric SPEC Unit
Frequency range 824-849MHz 25 MHz
Operating Bandwidth 824-849MHz 25 MHz
Maximum Output power
≤15 dBm
ALC
|Δ|≤2 dB
Maximum Gain
≥55 dB
IM3
≤-30/30kHz dBc
Ripple in band
≤6 dB
Spurious Emission 9kHz ~ 150kHz ≤-36/1kHz dBm
150kHz ~ 30MHz ≤-36/10kHz
30MHz ~ 1GHz ≤-36/100kHz
1GHz ~ 12.75GHz ≤-25/1MHz
VSWR
≤2.0 /
Noise Figure at Max. System Gain
≤7 dB
System Group Delay
≤1 μs
Frequency Stability
≤0.05ppm Hz
Downlink
Item Electric SPEC Unit
Frequency range 869-894MHz / /
Operating Bandwidth 869-894MHz 25 MHz
Maximum Output power
≤15 dBm
ALC
|Δ|≤2 dB




Maximum Gain
≥55 dB
IM3
≤-30/30kHz dBc
Ripple in band
≤6 dB
Spurious Emission 9kHz ~ 150kHz ≤-36/1kHz dBm
150kHz ~ 30MHz ≤-36/10kHz
30MHz ~ 1GHz ≤-36/100kHz
1GHz ~ 12.75GHz ≤-25/1MHz
VSWR
≤2.0 /
Noise Figure at Max. System Gain
≤7 dB
System Group Delay
≤1 μs
Frequency Stability
≤0.05ppm Hz
Mechanical Characteristic of CDMA Wideband Pico Repeater
Connectors N-female
Power Supply DC4.75—5.25V , AC 110~240V
Operating Temperature -10 ℃ ~+50℃
Humidity 90%
Power Consumption ≤10W max
Dimension(D*W*H) 152*110*25( mm)
weight ≤0.7kg

Note: Typical specifications at room temperature. VSWR test condition is uplink and downlink ATT setting 25dB

LED Function Indication for CDMA Wideband Pico Repeater
LED Function Working mode Failure
RED light in the middle Indication of downlink power The more downlink output power, brighter the LED Connect with power supply, the LED is bright while there is no conversation, downlink is under autoexcitation.
The red light in the left side Indication of uplink power The more uplink output power, brighter the LED Connect with power supply, the LED is bright while there is no conversation, uplink is under autoexcitation.
Green light Indication of power supply LED on means there is power supply The power supply is not working normally if the LED light is off.

Dimensions CDMA Wideband Pico Repeater
CDMA Wideband Pico Repeater

As a professional CDMA wideband pico repeater manufacturer and supplier in China, we also offer WiFi module, crystal resonator, TCXO, RF module, and more.

Inquiry Form
Other products
  • CDMA Pico RepeaterThe CDMA pico repeater is practical for small areas indoor DAS system, with quick coverage solution for weak signals reducing drop/off calls and eliminates the signal dead spot, rejecting the ...
  • DCS Selective Band RepeaterThe DCS selective band repeater is applied specifically in small area indoor DAS system. It provides quick coverage solution for small or weak signals and eliminates the signal dead spot, rejecting the ...