CDMA Pico Repeater

Home » Products » PICO Repeater » CDMA Pico Repeater

RCTC800X1555
RCTCX

The CDMA pico repeater is practical for small areas indoor DAS system, with quick coverage solution for weak signals reducing drop/off calls and eliminates the signal dead spot, rejecting the interference and providing a stable signal communication for cell phones. The CDMA pico repeater has power supply and output power indications; with ALC function that provides high reliability and stability and low interference to BTS. The CDMA pico repeater can be used in basements, cars, elevators, parking lots, villages, tunnels, mines, clubs, residential houses, countryside, tall buildings, vessels, underground facilities or any other place.

Electrical Specification CDMA Pico Repeater
Uplink

Item Electric SPEC Unit Note
Frequency range 824-849MHz / /
Operating Bandwidth 824-849MHz 5-25M MHz Customizable
Maximum Output power
0~15 dBm
ALC
|Δ|≤2 dB
Maximum Gain
≥ 60 dB
Gain Adjust Scope 1dB ~ 10dB |Δ|≤1 dB
10dB ~ 20dB |Δ|≤1 dB
20dB ~ 25dB |Δ|≤1.5 dB
IM3
≤-30/30kHz dBc
Ripple in band
≤6 dB
dB
Out of band rejection Fo+/-400kHz ≤50 dB
Fo+/-600kHz ≤40 dB
Fo+/-1MHz ≤35 dB
Fo+/-5MHz ≤25 dB
Spurious Emission 9kHz ~ 150kHz ≤-36/1kHz dBm
150kHz ~ 30MHz ≤-36/10kHz
30MHz ~ 1GHz ≤-36/100kHz
1GHz ~ 12.75GHz ≤-25/1MHz
VSWR
≤2 /
Noise Figure at Max. System Gain
≤8 dB
System Group Delay
≤5.5 μs
Frequency Stability
≤0.05ppm Hz
Downlink
Item Electric SPEC Unit Note
Frequency range 869-894MHz / /
Operating Bandwidth 869-894MHz 5-25M MHz Customizable
Maximum Output power
0~15 dBm
ALC
|Δ|≤2 dB
Maximum Gain 940-955MHz <=65 dB
Gain Adjust Scope 1dB ~ 10dB |Δ|≤1 dB
10dB ~ 20dB |Δ|≤1 dB
20dB ~ 25dB |Δ|≤1.5 dB
IM3
≤-30/30kHz dBc
Ripple in band
≤7 dB
Out of band rejection Fo+/-400kHz ≤50 dB
Fo+/-600kHz ≤40
Fo+/-1MHz ≤35
Fo+/-5MHz ≤25
Spurious Emission 9kHz ~ 150kHz ≤-36/1kHz dBm
150kHz ~ 30MHz ≤-36/10kHz
30MHz ~ 1GHz ≤-36/100kHz
1GHz ~ 12.75GHz ≤-25/1MHz
VSWR
≤2 /
Noise Figure at Max. System Gain
≤8 dB
System Group Delay
≤5 μs
Frequency Stability
≤0.05ppm Hz
Mechanical Characteristic of CDMA Pico Repeater
Mechanical Characteristic
Connectors N-female
Power Supply DC6V 3A, AC 110~240V
Operating Temperature -10 ℃ ~+50℃
Humidity 90%
Power Consumption ≤10W max
Dimension (D*W*H) 146*104*25( mm)
weight ≤1g

Note: Typical specifications at room temperature. VSWR test condition is uplink and downlink ATT setting 25dB

LED Function Indication for CDMA Pico Repeater
LED Function Working mode Failure
Red Light Warning Red LED is off, the device is working normal. Connect with power supply, LED is on while there is no conversation, which means autoexcitation warning or loosening of lock.
Green Light Indication of power supply LED is flickering, the device is working normal. LED is off; the power supply is not working normal.

Dimensions CDMA Pico Repeater
CDMA Pico Repeater

We are a professional CDMA Pico repeater manufacturer and supplier in China. We offer crystal resonator, SAW resonator, RF module, and TCXO, among others.

Inquiry Form
Other products
  • DCS Selective Band RepeaterThe DCS selective band repeater is applied specifically in small area indoor DAS system. It provides quick coverage solution for small or weak signals and eliminates the signal dead spot, rejecting the ...
  • GSM Selective Band RepeaterThe GSM selective band repeater is applied specifically in small area indoor DAS system. It provides quick coverage solution for weak signals and block zones reducing drop/off calls; it eliminates the signal ...