PCS Wideband Pico Repeater

Home » Products » PICO Repeater » PCS Wideband Pico Repeater

RCTP1G9K1555
RCTPK-15

The CDMA pico repeater is practical for small areas indoor DAS system, with quick coverage solution for weak signals reducing drop/off calls; it eliminates the signal dead spot, rejecting the interference and providing a stable signal communication for cell phones. The CDMA pico repeater has power supply and output power indications; with ALC function that provides high reliability and stability and low interference to BTS. The CDMA pico repeater can be used in basements, cars, elevators, parking lots, villages, tunnels, mines, clubs, residential houses, countryside, tall buildings, vessels, underground facilities or any other place.

Electrical Specification of PCS Wideband Pico Repeater
Uplink

Item Electric SPEC Unit
Frequency range 1850-1910MHz 60 MHz
Operating Bandwidth 1850-1910MHz 60 MHz
Maximum Output power
≤15 dBm
ALC
|Δ|≤2 dB
Maximum Gain
≥40 dB
IM3
≤-30/30kHz dBc
Ripple in band
≤6 dB
Spurious Emission 9kHz ~ 150kHz ≤-36/1kHz dBm
150kHz ~ 30MHz ≤-36/10kHz
30MHz ~ 1GHz ≤-36/100kHz
1GHz ~ 12.75GHz ≤-25/1MHz
VSWR
≤2.0 /
Noise Figure at Max. System Gain
≤7 dB
System Group Delay
≤1 μs
Frequency Stability
≤0.05ppm Hz
Downlink
Item Electric SPEC Unit
Frequency range 1930-1990MHz / /
Operating Bandwidth 1930-1990MHz 60 MHz
Maximum Output power
≤15 dBm
ALC
|Δ|≤2 dB




Maximum Gain
≥40 dB
IM3
≤-30/30kHz dBc
Ripple in band
≤6 dB
Spurious Emission 9kHz ~ 150kHz ≤-36/1kHz dBm
150kHz ~ 30MHz ≤-36/10kHz
30MHz ~ 1GHz ≤-36/100kHz
1GHz ~ 12.75GHz ≤-25/1MHz
VSWR
≤2.0 /
Noise Figure at Max. System Gain
≤7 dB
System Group Delay
≤1 μs
Frequency Stability
≤0.05ppm Hz
Mechanical Characteristic of PCS Wideband Pico Repeater
Mechanical Characteristic
Connectors N-female
Power Supply DC4.75—5.25V , AC 110~240V
Operating Temperature -10 ℃ ~+50℃
Humidity 90%
Power Consumption ≤10W max
Dimension(D*W*H) 152*110*25( mm)
weight ≤0.7kg

Note: Typical specifications at room temperature. VSWR test condition is uplink and downlink ATT setting 25dB

LED Function Indication for PCS Wideband Pico Repeater
LED Function Working mode Failure
RED Light in the middle Indication for downlink power The more downlink output power, brighter the LED Connect with power supply, the LED is bright while there is no conversation, downlink is under autoexcitation.
The red light in the left hand side Indication for uplink power The more uplink output power, brighter the LED Connect with power supply, the LED is bright while there is no conversation, uplink is under autoexcitation.
green light Indication for power supply LED on means there is power supply The power supply is not working normally if the LED light is off.

Dimensions of PCS Wideband Pico Repeater
PCS Wideband Pico Repeater

Shoulder is a specialized PCS wideband Pico repeater manufacturer based in China. We provide a comprehensive range of products, including SAW resonator, crystal resonator, WiFi module, SAW filter, and others.

Inquiry Form
Other products
  • WCDMA Wideband Pico RepeaterThe WCDMA wideband pico repeater works in small areas indoor for DAS system. It provides quick coverage solution for small or weak signal and block zones reducing drop/off calls. It eliminates the signal ...
  • WCDMA Selective Band RepeaterThe WCDMA selective band repeater is applied specifically in small area indoor DAS system. It provides quick coverage solution for small signal weak and block zones reducing drop/off calls; it ...