Home » Products
  • 315MHz SAW ResonatorTemperature cycling
    The 315MHz SAW resonator must be in a place with low temperature, -40 ℃ for thirty minutes, following by a high temperature of 25℃ for five minutes and then ahigher temperature of 85℃ for 30 minutes. When the device is released into a room with normal temperature conditions for1 to 2 hours priorto the measurement, it shallmeet the specifications in table 1.
  • 433MHz SAW ResonatorStatic voltage
    Please avoid static voltage between signal load and ground, it may cause deterioration or destruction of the SAW resonator components.
    Ultrasonic cleaning
    Please avoid ultrasonic cleaning, it may cause deterioration or destruction of the SAW resonator components.
  • 447MHz SAW ResonatorPlacing the 447MHz SAW resonator at 85 ℃ for sixteen hours and then releasing the filter into a room with normal temperature conditions for twenty-four hours prior to the measurement, it shall fulfil the specifications in table 1
    Placing the 447MHz SAW resonator at -40 ℃ for sixteen hours and then releasing the device into a room with normal temperature conditions for twenty-four hours prior to the measurement, it shall fulfil the specifications in table 1
  • 868MHz SAW ResonatorSubmerge the 868MHz SAW resonator terminals into the solder bath at 260℃ ±5℃ for 10 ± 1 second. Then release the device into a room with normal temperature conditions for 4 hours, it shall meet the specifications in table 1.
    Submerge the device terminals into the solder bath at 245℃ ±5℃ for five seconds. More than 95% area of the soldering pad must be covered with new solder; the 868MHz SAW resonator shall meet the specifications in ...
  • 915MHz SAW ResonatorTemperature cycling
    The 915MHz SAW resonator must be in a place with low temperature, -40 ℃ for thirty minutes, following by a high temperature of 25℃ for five minutes and then a higher temperature of 85℃ for thirty minutes. When the device is released into a room with normal temperature conditions for one or two hours prior to the measurement, it shall meet the specifications in table 1.
  • 315AS4 SAW FilterTemperature cycling
    The 315AS4 SAW filter must be in a place with low temperature, -40 ℃ for thirty minutes, following by a high temperature of 25℃ for five minutes and then a higher temperature of 85℃ for thirty minutes. When the device is released into a room with normal temperature conditions for one or two hours prior to the measurement, it shall meet the specifications in table 1.
  • 433MHz SAW FilterTensile Strength of Carrier Tape: 4.4N/mm width
    TopCover Tape Adhesion (See the below figure)
    (1) Pull off angle: 0~15º
    (2) Speed: 300mm/min.
    (3) Force: 20~70g
  • 868MHz SAW FilterIf the device terminals are immerse no closer than 1.5 mm into the solder bath at 260℃ ±10℃ for 10±one second and then release the device into a room with normal temperature conditions for four hours, it shall meet the specifications in table 1.
    Submerge the device terminals into the solder bath at 245℃ ±5℃ for five seconds. More than 95% area of the soldering pad must be covered with new solder; the 868MHz SAW filter shall meet the specifications in table 1.
  • 902MHz Base Station SAW FilterPlacing the 902MHz base station SAW filter at 85 ℃ for sixteen hours and then releasing the filter into a room with normal temperature conditions for twenty-four hours prior to the measurement, it shall fulfil the specifications in table 1
    Placing the 902MHz base station SAW filter at -40 ℃ for sixteen hours and then releasing the device into a room with normal temperature conditions for twenty-four hours prior to the measurement, it shall fulfil the ...
  • 915MHz SAW FilterPlacing the 915MHz SAW filter at 85 ℃ for sixteen hours and then releasing the filter into a room with normal temperature conditions for twenty-four hours prior to the measurement, it shall fulfil the specifications in table 1
    Placing the 915MHz SAW filter at -20 ℃ for sixteen hours and then releasing the device into a room with normal temperature conditions for twenty-four hours prior to the measurement, it shall fulfil the specifications in table 1
    The 915MHz SAW filter must be in a place with low temperature, -40 ℃ for 30 minutes, following by a high ...
  • 926MHz SAW FilterTemperature cycling
    The SAW filter must be in a place with low temperature, -40 ℃ for 30 minutes, following by a high temperature of 25℃ for five minutes and then a higher temperature of 85℃ for 30 minutes. When the device is released into a room with normal temperature conditions for one or two hours prior to the measurement, it shall meet the specifications in table 1.
  • 947MHz Base Station SAW FilterThe 947MHz base station SAW filter must be in a place with low temperature, -40 ℃ for 30 minutes, following by a higher temperature of 85℃ for 30 minutes. When the device is released into a room with normal temperature conditions for 24 hours prior to the measurement, it shall meet the specifications in table 1.
    If the SAW filter terminals are immerse no closer than 1.5 mm into the solder bath at 260℃ ±10℃ for 10±one second an then release it into a room with normal temperature conditions for four hours, it shall meet the ...
  • 1575MHz SAW FilterThe 1575MHz SAW filter is for GPS applications with a usable bandwidth of 2 MHz. It has no impedance matching require for operation at 50Ω. It has a single-ended operation.
    All specifications are based on the matching schematic table shown, measured by Agilent Network analyzer and full 2 port calibration.
    Electrical margin has been built into the design to account for variations due to temperature drift and ...
  • ASK Super Regenerative Receiver ModuleRCT01DRX331 or RCT01DRX432 ASK super regenerative receiver
    module is commonly used in remote controls,
    automatic electric gates, and car, residential
    security or commercial security alarms.
  • 433.92MHz ASK Receiver Modular RCT01DRX406 or RCT02DRX402 is ideally
    suitable for remote controls, automatic
    electric gates, and car, residential security
    or commercial security alarms, and many more.
  • ASK Superheterodyne Wireless Receiver ModuleOur ASK superheterodyne wireless receiver module is ideal for remote keyless entry, remote control curtain, wireless burglar security alarm, wireless industrial control system, wireless data transmission, etc. This product has a lot of features which are as follows. Our wireless receiver module can be operated between -40 ℃ and 85 ℃. It works even at low temperatures. It is easy to pass the CE or FCC international authentication, due to its high selectivity and good stray radiation inhibition function.
  • ASK/FSK Superheterodyne Wireless Receiver ModuleASK or FSK superheterodyne wireless receiver module shares a universal wireless receiver module RCT01TRXB15. With the adoption of the automotive-grade RF wireless data receiver chip, it offers the highest sensitivity and strong anti-interference ability, with wireless signal input to the data signal output without any external circuit. Thanks to its superior performance, it is selected as the RKE or BCM system of automotive. Users only need to decode the data through a simple circuit and then any wireless product development .
  • Superheterodyne Receiver ModuleOur RCT01SRXB07 wireless high frequency superheterodyne receiver module is high sensitivity ASK or OOK receiver module. Due to its high stability, low cost, as well as strong anti jamming capability, it can offer the best RF solution in the market, especially suitable for industry control or harsh conditions. Built-in automatic generation control or AGC, our product automatically changes its front end LNA gain according to the change of receiving signals, ensuring the stability of input signals and higher sensitivity.
  • ASK Superheterodyne Receiver ModuleRCT01PRXB04-315/433 ASK superheterodyne receiver module offers a high sensitivity of -105dBm,
    ideally suitable for remote keyless entry, automatic door opener, remote control curtain,
    wireless security alarm, wireless industrial control system, wireless data transmission,
    etc. This product comes with 43*11mm in dimension,
    offering curved pins which are placed at 2.54mm intervals.
  • ASK Radio Transmitter ModuleAs a superior performance transmitter module for ISM band, our RCT02STX8 ASK radio transmitter module comes with advantages of high power transmission and low voltage power supply. Due to its superior quality and performance, this product easily passes the Fcc or CE authentication. With the adoption of European brand RF wireless data transferring or receiver chipsets, it is able to convert wireless signal input to data signal output without any external circuit. Users just need to decode the data by a simple circuit and then any wireless.
  • 1000M Range Transmission ModuleRCT02TXD2 has the advantages of small size, wild operating voltage range(2.8-3.6V), high transmitting power, low power consumption, and stable operating function, which adopting the SMD technique, the advanced crystal based(PLL) on frequency stabilization techniques and superior PCB, and other materials of very low loss in quality. This module is produced by the highly developed techniques, tested by the imported machine, strictly quality controlled before shipment, which directly matches with various coding circuit...
  • ASK RF Receiver ModuleThe RCT01IRXB02 superheterodyne RF receiver module is a superior performance receiver for ISM band. With the adoption of lnfineon's industrial RF wireless data receiver chip, this ASK superheterodyne RF receiver module has the highest sensitivity and strong anti-interference ability, with wireless signal input to the data signal output without any external circuit. Its superior performance took the interest of the car manufactures market, adopting this unit as the preferred choice for RKE receiver module.
  • ASK Wireless Transmitter ModuleOperating frequency includes 315 MHz and 433 MHz.
    The use of SAW resonator ensures frequency stability of ±75KHZ.
    Together with RXB8 receiver module, the ASK wireless transmitter module can achieve a transmitting distance of 300 to 500m.
    The static power consumption is very low, just 10mA. There is nearly no current consumption in case of ...
  • FSK Transceiver ModuleThe RCT03CC1101 FSK transceiver module is a true single-chip UHF transceiver based on 3 wire digital serial interface and an entire Phase-Locked Loop (PLL); the frequency can be set for precise local oscillator generation. It can be used in UART / NRZ / Manchester encoding / decoding. The FSK transceiver module has a high performance and low cost, widely used for wireless security system or specific remote-control function and others wireless system services. Shoulder Electronics Ltd can design the FSK transceiver module according to your ...
  • FSK/ASK/OOK/MSK Transceiver ModuleRCT03CC2502 is a FSK/ASK/OOK/MSK transceiver module. It provides extensive hardware support for packet handling, data buffering, burst transmissions, clear channel assessment, link quality indication and wake-on radio, it supports the frequency 2400-2483.5MHz ISM band modules. Its data stream can be Manchester coded by the modulator and decoded by the demodulator. Shoulder Electronics Ltd can design the FSK/ASK/OOK/MSK transceiver module according to your needs or specifications. It can be used in 2400-2483.5MHz ISM/SRD band ...
  • 2.4G LAN Transceiver ModuleThe RCT03CC2503, 2.4G LAN is a FSK/ASK/OOK/MSK transceiver module. It provides extensive hardware support for packet handling, data buffering, burst transmissions, clear channel assessment, link quality indication and wake-on radio, it supports the frequency 2400-2483.5MHz ISM band modules. Its data stream can be Manchester coded by the modulator and decoded by the demodulator. Shoulder Electronics Ltd can design the 2.4G LAN transceiver module according to your needs or specifications. It can be used in 2400-2483.5MHz ISM/SRD band ...
  • 433M RF Receiver ModuleThe 433M RF receiver module is a superheterodyne receiver module. The set carrier frequency is 433.92MHz, while it can be customized within the range of 380 to 450MHz. The RF receiver module offers a high sensitivity of -115dBm. It adopts OOK/ASK modulation mode and achieves a maximum data transmission rate of 10kbps. The receiver module is easy to use, which can realize wireless signal input to data signal output without any external circuit. In addition, it provides reliable performance, stable data output, received signal strength indication ...
  • Radio Receiver ModuleThe receiver module has strong anti-interference ability and its image rejection ratio reaches -40db.
    The good local oscillator radiation inhibition function enables multiple receiver modules to work together without affecting the receiving distance.
    With stabilized voltage supply inside, the module has an input voltage range of 3V to 5.5V.
    The radio receiver module offers low power consumption. The operating current is just about 9mA. The SHUT ...

Shoulder is a professional SAW device manufacturer in China. Our company offers a wide range of products, including SAW resonator, SAW filter, RF module, WiFi module, crystal resonator, PICO repeater and others.